SuperAP 530g Rugged Access Point
Public Access Wi-Fi with Tamper and Weather Resistant Case
802.11b compliant SuperAP 530 is designed for distributed Wi-Fi deployment
in a hotel, apartment building, airport, or other public venue. It is an
extremely Rugged Access Point, with up to 300 mWatt transmit output and
industry standard Power over Ethernet. Ideal for indoor or outdoor applications
where industrial hardened equipment is required, we use a NEMA style enclosure,
lockable to the wall or ceiling. The SuperAP 530g can act as an Access Point,
Bridge repeater, AP Client, or combination Access Point and Bridge repeater.
Pricing for the 530g is more cost effective than ever before, dramatically
lowering your infrastructure costs, and increasing your Return on Investment.
Hardware Features
The SuperAP 530g comes with an industry standard N-bulkhead connector so you can use a wide assortment of the best antennas available. Your backbone Ethernet cable connects to the AP through a moisture-proof gland and the entire unit is sealed with a heavy-duty gasket. Thus the unit is entirely sealed from the harshest elements and is suitable for indoor or outdoor applications. The 530g supports IEEE 802.3af 48Volt Power over Ethernet. It uses external replaceable antennas as well as Transmit Power control, enabling it to be used in a wide variety of special applications where the wireless output needs to be controlled for the environment. Special high-gain, omni-directional, directional, or Yagi antennas can be attached to the unit using standard N-type cabling.
User Authentication
Secure authentication based on industry standards
The 530g incorporates 802.1x/Radius–based authentication features
that interoperate with a back-office Radius server to provide authentication
of each user. 802.1x-based authentication means a 530g is compatible with
a wide variety of shared usage and public access applications. In addition,
the AP can authenticate users based on their MAC address if desired.
Highly secure and manageable
In addition to Radius-based and MAC-based authentication in the Advanced
Version, the 530g supports the 64-bit and 128-bit Wireless Encryption Protocol,
and disabling of SSIDs.
The 530g is easy for administrators to setup through Web-based management,
or our Windows-based network manager. Additionally, management can be
done via SNMP V 1, V 2, 802.1x and 802.1d MIBs. It is UPnP-enabled and
supports remote firmware upgrades.
Extended Network Range - Repeater functionality
The 530g is able to operate as a repeater in addition to an access point, allowing it to communicate with other compatible AP/routers to form a Wireless Distribution System. This greatly extends the reach of the wireless network. Using directional antenna and the unit’s powerful 300mW radio, a range of several miles is possible. Aligning directional antennas is easy using built-in antenna alignment assistance. Up to six WDS links can be established from a single unit.
AP client mode
Operators can be extend the network even further by configuring the SuperAP 530g as a client device, compatible with any 802.11b compliant Access Point. AP client mode includes RSSI for link and antenna position monitoring as well as built-in site survey capability.
Compatibility
The 530g is fully compatible with the Wi-Fi standard, ensures the usability with any Wi-Fi compatible wireless equipped device. Wi-Fi is the fastest growing standard for Internet access and is supported on a vast number of PCs today.
Technical Specifications
Wireless
- IEEE 802.11b
- Frequency band: 2.4-2.4835GHz
- Modulation Techniques: DSSS (CCK, DQPSK, DBPSK)
- Media Access Protocol: CSMA/CA with ACK
- Data Rate: 11Mbps with fallback rates of 5.5, 2, and 1M bps
- AP Range: 1530g meters outdoor line of sight (client dependent)
- WDS Range: 530g0 meters outdoor line of sight (antenna dependent)
- 200 mWatt transmit power with Transmit power control
- 95 dBm - 89 dBm receiver sensitivity @FER = .08
- DHCP Client and Server
- 6 WDS repeater links
- AP client mode
- 802.1d Bridging functionality
- UPnP
- MAC based access control
- 64/128 bit RC4 WEP
- Web-based management
- Antenna alignment and RSSI monitoring
- Web-based or TFTP firmware upgrade
- System logging (local or remote)
- SNMP v1/v2, MIB II with traps, 802.1x, 802.1d MIBs
- Telnet
- 1 10/100M Ethernet LAN port
- 1 Serial port
- Works with any Wi-Fi certified interfaces
- Operating Temperature: -20 to 70 C
- Storage Temperature: -20 to 70 C
- Humidity: Max. 95% non-condensing
- 802.3af 48 Volt Power Over Ethernet
- AC Input: 100 – 240 VAC, 50/60 Hz, 0.35A; Output: 5V, 2A
- FCC part 15 Class B, VCCI Class B, CE Mark, UL
- 802.1x Port-based Network Access Control (EAP-MD5, EAP-TLS)
- Wireless Protected Access (WPA)
- AP load balancing
- Wireless Client Isolation
- Association Control
- 30 days satisfaction guaranteed
- One year parts and labor
- Ask about our 500mW, 1W & 2W or Dual Radio Access Points
- 50, 200 or 1000 subscriber user controllers with bandwidth limiting are also available
